Spray brake caliper paint silver 150ml

Cena :
7.30€
  • Model: 4048500736582
  • Shipping Weight: 0.15lbs
  • Units in Stock : 3
  • Manufactured by: MOTIP-DUPLICOLOR

Description

QUALITY AND PROPERTIES

  • High-grade acrylic quality
  • Quick-drying
  • Free of lead
  • Durable gloss
  • Weather-resistant
  • Excellent adhesion
  • Very good coverage
  • Hard surface, good elasticity
  • Excellent colour retention (light-proof, non-yellowing)
  • Dirt resistant due to very hard, smooth surface
  • Not resistant to very aggressive chemicals, e.g. brake fluid

PHYSICAL AND CHEMICAL DATA

  • Basis of the binder: nitro-combi
  • Colour: miscellaneous
  • Smell: solvent
  • Degree of gloss (at measurement angle 60° acc. to DIN 67530):
    glossy: 80 gloss units
  • Efficiency:
    Depending on consistence and color of the ground:
    150 ml are sufficient for up to 2 brake calipers
  • Drying time (at 20°C, 50% relative air humidity):
    Dust-dry: after approx. 10 minutes
    Dry to touch: after approx. 30 minutes
    Cured: after approx. 2 hours
    The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
  • Temperature-resistant: up to 80°C
  • Storage stability:
    10 years, if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
  • Size: aerosol cans, maximum nominal volume 150 ml

USING INSTRUCTIONS

The most DUPLI-COLOR spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the label!

Application

Preparation:

  • Jack up car before dismantling the wheel in accordance with manufacturer regulation.
  • Clean surface from fat and dirt, e.g. with presto Brake Cleaner art.no. 306185 and with the help of a brush.
  • Protect from spray mist by masking off brake disc, brake pads and surrounding area.
  • Paint can be sprayed directly on the brake caliper, but we recommend to use DUPLI-COLOR Primer for better adhesion.

Lacquering:

  • Before use, shake can for 3 minutes.
  • Test spray at an invisible spot.
  • Spray from a distance of 20 - 30 cm.
  • Spray several thin coats in 3 - 5 minute intervals on the dry repair spot.
  • Do not spray over surfaces which are painted with synthetic resin lacquer!

 


Manufacturer Info

Who's Online

There currently are 18 guests online.