Slovenčina
English
Categories
- Automotive aerosol paints
- Touch up system
- Color code automotive paints
- Color code from VIN
- Step by step - refinishing paint
- Primers & fillers
- Clear coats
- Polishing
- Non aerosol paints
- Tuning line
- Chassis protection
- Sealing, bonding and lamination
- Appliances
- Tools and guides
- Abrasives
- Universal aerosol paints
- Degreasers and cleaners
- Colour Cards
- Lubricants
- Others
Step by step - refinishing paint
1K acryl lacquer high gloss - aerosol 500ml MOTIP
MoTip 2-Coat Clear Lacquer is weather-resistant, high gloss finish for acrylic sprays.
Absolutely necessary to seal all metallic and pearl lacquers to protect them from weathering and environmental impact.
Even suitable as top coat for MoTip Tuning Alu Wheel Paint (e. g. argento art.no. 06020). For clearing transition from the old and the new lacquer use MoTip Spot Blender.
Quality and properties
1K Epoxy primer grey 400ml MIPA
1K Plastic Grundierfiller spray 400ml MIPA
9.20€
2K acryl lacquer high gloss - aerosol 200ml COLORMATIC
ColorMatic 2K clear coat is a high-gloss, extremely scratch-resistant 2-component clear coat with very high resistance to petrol, UV rays and weathering. Due to its quick drying time, very good flow and easy polishing, ColorMatic 2K clear coat is particularly suitable for spot repairs. Use ColorMatic spot blender for spot repairs. Ready-filled ColorMatic pre-fill products can be recoated after 30-minute drying time. Previous paintwork has to be fully dry.
Application:
Ideal for spot repairs and refinishing parts
2K Two component gloss varnish - aerosol 400ml MIPA
Two component varnish with high gloss.
Use:
It is suitable for minor refinishing works and also for whole part refinishing.
Quality:
- high gloss result
- high UV protection - non yelowing
- high resistance against weather. mechanical and chemical stresses
- resistance against petrol and diesel !
- good atomisation
- safe and clean application of the included hardener
Drying times:
- dust dry: 10 - 15 min.
- touch dry: 4 hours
- completelly hard: 24 hours
- polishable: 8 - 9 hours
Pot life: 5 - 6 hours
Aerosol SPOTBLENDER 150ml MOTIP
MoTip Spot Blender is a mixture of solvents that creates a smooth blend effect from the old to the new lacquer on paintwork refinishing.
Aerosol WHEELSPRAY black 500ml MOTIP
QUALITY AND PROPERTIES
- High-grade, quick-drying nitro-combi lacquer
- Good flow, smooth surface
- Weather-resistant, light-proof and non-yellowing
- Limited fuel-resistant
- Good colour and gloss retention
- Hard surface, abrasion-resistant
PHYSICAL AND CHEMICAL DATA
- Basis of the binder: acryl resin
- Colour: silver, gold, white, steel
- Smell: solvent
- Degree of gloss (at measurement angle 60° acc. to DIN 67530):
satin matt: 40-50 gloss units
80 - 90 gloss units after coating with MoTip Rallye Clear Coat glossy - Efficiency:
Depending on consistence and color of the ground:
150 ml are sufficient for 1 rims
500 ml are sufficient for 4-5 rims - Drying time (at 20°C, 50% relative air humidity):
Dust-dry: after approx. 5-10 minutes
Tack-free: after approx. 10-20 minutes
Cured: after 24 hours
Coatable with clear lacquer: after approx. 2 hours
The drying time depends on surrounding temperature, air humidity and thickness of the applied coat. - Temperature-resistant: up to 110°C
- Storage stability:
10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) - Size:
aerosol cans with maximum nominal volume 150 ml resp. 500 ml
INSTRUCTION MANUEL
Before use, carefully read and observe the warning texts on the label!
Preparation of the ground:
- Carefully clean rims from dirt, fat and brake-dust.
- Treat existing pore rust with presto Deruster.
- The ground has to be sanded, clean, dry and fat-free.
- Mask off the rim edges with masking tape.
- Use paper to protect surrounding area from spray-dust.
- Prime with CAR's Primer.
- After drying, slightly sand (sanding paper grain P600).
Lacquering:
- The surface has to be clean, dry and free from rust and fat.
- Before use, shake the can vigorously for 2 minutes.
- Test spray to check colour-matching.
- Spray several thin coats in 3 - 5 minute intervals from a distance of approx. 25 cm.
- After 60 minutes drying time, coat with MoTip Rallye Clear Varnish to protect the metal pigments in the lacquer.
- Do not spray over synthetic paints!
7.94€
Aerosol WHEELSPRAY silver 500ml MOTIP
QUALITY AND PROPERTIES
- High-grade, quick-drying nitro-combi lacquer
- Good flow, smooth surface
- Weather-resistant, light-proof and non-yellowing
- Limited fuel-resistant
- Good colour and gloss retention
- Hard surface, abrasion-resistant
PHYSICAL AND CHEMICAL DATA
- Basis of the binder: acryl resin
- Colour: silver, gold, white, steel
- Smell: solvent
- Degree of gloss (at measurement angle 60° acc. to DIN 67530):
satin matt: 40-50 gloss units
80 - 90 gloss units after coating with MoTip Rallye Clear Coat glossy - Efficiency:
Depending on consistence and color of the ground:
150 ml are sufficient for 1 rims
500 ml are sufficient for 4-5 rims - Drying time (at 20°C, 50% relative air humidity):
Dust-dry: after approx. 5-10 minutes
Tack-free: after approx. 10-20 minutes
Cured: after 24 hours
Coatable with clear lacquer: after approx. 2 hours
The drying time depends on surrounding temperature, air humidity and thickness of the applied coat. - Temperature-resistant: up to 110°C
- Storage stability:
10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%) - Size:
aerosol cans with maximum nominal volume 150 ml resp. 500 ml
INSTRUCTION MANUEL
Before use, carefully read and observe the warning texts on the label!
Preparation of the ground:
- Carefully clean rims from dirt, fat and brake-dust.
- Treat existing pore rust with presto Deruster.
- The ground has to be sanded, clean, dry and fat-free.
- Mask off the rim edges with masking tape.
- Use paper to protect surrounding area from spray-dust.
- Prime with CAR's Primer.
- After drying, slightly sand (sanding paper grain P600).
Lacquering:
- The surface has to be clean, dry and free from rust and fat.
- Before use, shake the can vigorously for 2 minutes.
- Test spray to check colour-matching.
- Spray several thin coats in 3 - 5 minute intervals from a distance of approx. 25 cm.
- After 60 minutes drying time, coat with MoTip Rallye Clear Varnish to protect the metal pigments in the lacquer.
- Do not spray over synthetic paints!
7.94€
Automotive spray paint 375ml
- year of production
- color code from the VIN plate
- sand the surface with a sanding paper gr. 800
- if you require perfect shine the surface is polishable after 24 hours
- ALFA ROMEO
- AUDI
- BMW
- CHEVROLET
- CITROEN
- DACIA
- DAEWOO
- FERRARI
- FIAT
- FORD EUROPE
- HONDA
- HYUNDAY
- JAGUAR
- KIA
- LANCIA-AUTOBIANCHI
- LAND ROVER
- MAZDA
- MERCEDES BENZ
- MITSUBICHI
- NISSAN
- OPEL
- PORSCHE
- PEUGEOT
- RENAULT
- ROVER
- SEAT
- SKODA
- SUBARU / FUJI
- SUZUKI
- TOYOTA
- VOLKSWAGEN
- VOLVO
BODYFINE F22O putty / 250gr
2K extra fine polyester stopper / filler for minor imperfections on surfaces. Ensures a smooth surface and a perfect feather edge. Easy to sand with P150 - P400 grit paper to obtain a perfect pinhole free finish. Also suitable for plastic bumper repairs
4.30€
Finish NC putty / 150gr 1K BODY F980
One component fine filler, ideal for filling pinholes and finishing small uneven surfaces. Apply 2-3 light coats with a flash-off time and allow 30 minutes of drying. Can be easily sanded with P600-P1000 grit paper. Can be overcoated with all type of primers or paint systems.
3.95€