English

Slovenčina
English

Spray paint - new plastic parts

Filter Results by:

compare

View as Grid

View as List

1K PLASTIC GRUNDIERFILLER SPRAY 400ML

Mipa 1K-Plastic-Grundierfiller-Spray is a fast drying plastic primer with good filling properties for the use on many commonly

used plastics in the automotive sector. Due to its special formulation Mipa 1K-Plastic-Grundierfiller-Spray can also be

applied on extremely difficult plastics such as PP without additional pretreatment. Complex processes such as

flame treatment or plasma processing become unnecessary in many cases. Recoatable with Mipa 1K and 2K topcoats.

Substrate:

Adhesion promoter for the following substrates / plastics:

PP-EPDM, ABS, PC, ABS-PC, PP

PMMA, PA, PUR, PVC and GfK

Pretreatment / Cleansing:

Pre-cleansing with Mipa Silikonentferner, Mipa Kunststoff-Reiniger, or

Mipa WBS-Reiniger

Characteristics:

Fast drying

Adhesion promoter for PP

7.90€

Vloženie do košíka

...

Vloženie do košíka

...

Vloženie do košíka

...

Vloženie do košíka

Aerosol spray paint 375ml - metallic

A solvent based acryl spray paint prepared according your specification. The color code is stated in the VIN plate on certain places of your car.

The product is suitable for minor car refinishing works (e.g.: spraying bumpers, fenders and other minor works)

Covering is aprox. 1m2 (dry film thickness aprox. 15-20 micrometers),

The paint has to be overcoated with a 1K or 2K clear varnish aprox. after 15 - 60 minutes.

We need to know all the following information:

- car brand
- year of production
- color code from the VIN plate

Instructions of use:

- if it's necessary to level the surface with a polyester putty ans sand it with a sanding paper folowing the instructions stated on the label on the putty

- spray appropriate filler
- sand the surface with a sanding paper gr. 800

- spray metallic spray paint in several thin layers (1/2 + 1 + 1 + 1/2) the flash off time is 2-5 min.

- after 15 min. it's absolutelly necessary to overcoat the surface with a clear varnish in several thin layers
- if you require perfect shine the surface is polishable after 24 hours

ALFA ROMEO
AUDI
BMW
CHEVROLET
CITROEN
DACIA
DAEWOO
FERRARI
FIAT
FORD EUROPE
HONDA
HYUNDAY
JAGUAR
KIA
LANCIA-AUTOBIANCHI
LAND ROVER
MAZDA
MERCEDES BENZ
MITSUBICHI
NISSAN
OPEL
PORSCHE
PEUGEOT
RENAULT
ROVER
SEAT
SKODA
SUBARU / FUJI
SUZUKI
TOYOTA
VOLKSWAGEN
VOLVO

13.90€

Vloženie do košíka

...

Vloženie do košíka

...

Vloženie do košíka

...

Vloženie do košíka

1K acryl lacquer high gloss - aerosol 500ml

MoTip 2-Coat Clear Lacquer is weather-resistant, high gloss finish for acrylic sprays.

Absolutely necessary to seal all metallic and pearl lacquers to protect them from weathering and environmental impact.

Even suitable as top coat for MoTip Tuning Alu Wheel Paint (e. g. argento art.no. 06020). For clearing transition from the old and the new lacquer use MoTip Spot Blender.

Quality and properties

High-grade acrylic quality
Quick-drying
Durable gloss
Excellent adhesion
Very hard surface, good elasticity
Good flow, smooth surface
Suitable for indoors and outdoors applications
Polishable
Resistant to dirt due to very smooth surface
Weather-resistant, light-proof, UV-proof (non-yellowing
Scratch-, shock- and impact-resistant
Limited resistance against petrol

Physical and chemical data

Basis of the binder: acrylic resin
Colour: colourless
Smell: solvent
Degree of gloss (at measurement angle 60° acc. to DIN 67530):
glossy: 90 gloss units
Efficiency:
Depending on consistence and color of the ground:
12 ml for small spots
500 ml are sufficient for approx. 1.25 - 1.75 m²
Drying time (at 20°C, 50% relative air humidity):
12 ml:
Dust-dry: after approx. 15 minutes
Dry to touch: after approx. 60 minutes
400 ml:
Dust-dry: after approx. 5-10 minutes
Tack-free: after approx. 10-20 minutes
Coatable: after approx. 2 hours
The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
Temperature-resistant: up to 110°C
Storage stability:
touch-up pencil: 5 years, aerosol can: 10 years, if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
Size:
touch-up pencils 12 ml,
aerosol cans with maximum nominal volume 500 ml

6.90€

Vloženie do košíka

...

Vloženie do košíka

...

Vloženie do košíka

...

Vloženie do košíka

2K acryl lacquer high gloss - aerosol 200ml

ColorMatic 2K clear coat is a high-gloss, extremely scratch-resistant 2-component clear coat with very high resistance to petrol, UV rays and weathering. Due to its quick drying time, very good flow and easy polishing, ColorMatic 2K clear coat is particularly suitable for spot repairs. Use ColorMatic spot blender for spot repairs. Ready-filled ColorMatic pre-fill products can be recoated after 30-minute drying time. Previous paintwork has to be fully dry.

Application:
Ideal for spot repairs and refinishing parts

Technical information 2K Hi-Speed Clear Coat, Glossy

Quality and properties

High-gloss, extremely scratch-resistant 2-component clear coat with very high resistance to petrol, UV rays and weathering
Long pot life
Fast drying time
Very good flow
Easy to polish
Best to use 200 ml can to avoid surplus

Physical and chemical data

Basis of binder: Acrylic
Colour: transparent
Smell: solvent
Degree of gloss: (at measurement angle 60° acc. to DIN 67530?
glossy: 85 gloss-units
Efficiency:
Depending on consistence and colour of the ground:
200 ml are sufficient for approx. 0,3 - 0,4 m²
500 ml are sufficient for approx. 0,8 - 1,0 m²
Substrate:
solvent- and water-based base coats
Drying time (at 20°C, 50% relative air humidity):
Dust-dry: after approx. 5 minutes
Dry to touch: after approx. 5 hours
The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
Temperature resistance: to 120°C
Storage stability:
36 month if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
Size:
2 components aerosol cans, maximum nominal volume 200 and 500 ml
VOC-value: 118,6g
Pot-life:
24 hours at room temperature (20 - 25°C)
5 days at cool storage (6°C)
Befor using again warm up to room temperature (20 - 25°C).
See using instruction.