How to repair minor scratches
2K extra fine polyester stopper / filler for minor imperfections on surfaces. Ensures a smooth surface and a perfect feather edge. Easy to sand with P150 - P400 grit paper to obtain a perfect pinhole free finish. Also suitable for plastic bumper repairs
4.30€
One component fine filler, ideal for filling pinholes and finishing small uneven surfaces. Apply 2-3 light coats with a flash-off time and allow 30 minutes of drying. Can be easily sanded with P600-P1000 grit paper. Can be overcoated with all type of primers or paint systems.
3.85€
MoTip 2-Coat Clear Lacquer is weather-resistant, high gloss finish for acrylic sprays.
Absolutely necessary to seal all metallic and pearl lacquers to protect them from weathering and environmental impact.
Even suitable as top coat for MoTip Tuning Alu Wheel Paint (e. g. argento art.no. 06020). For clearing transition from the old and the new lacquer use MoTip Spot Blender.
ColorMatic 2K clear coat is a high-gloss, extremely scratch-resistant 2-component clear coat with very high resistance to petrol, UV rays and weathering. Due to its quick drying time, very good flow and easy polishing, ColorMatic 2K clear coat is particularly suitable for spot repairs. Use ColorMatic spot blender for spot repairs. Ready-filled ColorMatic pre-fill products can be recoated after 30-minute drying time. Previous paintwork has to be fully dry.
Application:
Ideal for spot repairs and refinishing parts
24 hours at room temperature (20 - 25°C)
5 days at cool storage (6°C)
Befor using again warm up to room temperature (20 - 25°C).
See using instruction.
MoTip Spot Blender is a mixture of solvents that creates a smooth blend effect from the old to the new lacquer on paintwork refinishing.
7.90€
Sanding paper for wet sanding.
You can use it before spraying a filler.
0.59€The sanding paper is suitable to use for sanding a filler before spraying a metallic paint or any final coat.
0.59€The sanding paper is suitable for removing a dust on a varnish before polishing.
0.59€