How to refinish yellowed headlights made from polycarbonate
- polycarbonate plastic surface sand with sanding paper gr. 800 thoroughly (wet sanding)
- in next step sand with sanding paper gr.2000 (wet sanding)
- the surface must be dry
- use silicon remover
- spray 1 thin layer with Colormatic Plastic primer
- drying time aprox. 10 min
- spray Colormatic two component varnish in 2 layers
MP Tape 80° - Top quality
ColorMatic plastic adhesive is applied directly as a primer and sticks very well on all plastic interior and exterior car parts, including bumpers, mirrors and tuning parts. It can be painted over after drying for about 10 minutes with, for example, ColorMatic 1K primer filler, plastic paint or pre-fill base coat.
The ColorMatic plastic adhesive is suitable for most car and lorry interior and exterior plastic parts.
QUALITY AND PROPERTIES
Environmentally sound: The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
Before use, carefully read and observe the warning texts on the label!
5.90€
ColorMatic 2K clear coat is a high-gloss, extremely scratch-resistant 2-component clear coat with very high resistance to petrol, UV rays and weathering. Due to its quick drying time, very good flow and easy polishing, ColorMatic 2K clear coat is particularly suitable for spot repairs. Use ColorMatic spot blender for spot repairs. Ready-filled ColorMatic pre-fill products can be recoated after 30-minute drying time. Previous paintwork has to be fully dry.
Application:
Ideal for spot repairs and refinishing parts
The sanding paper is suitable to use for sanding a filler before spraying a metallic paint or any final coat.
0.59€
The sanding paper is suitable for removing a dust on a varnish before polishing.
0.59€
Description: · size...
The sanding paper is suitable for removi...
© Copyright 2019 FARLAZ
Slovenčina
English