...

...

...

MoTip Plastic Primer is a bonding agent for the final varnishing of car plastic parts with MoTip spray paints.

Suitable for car parts, garden furniture and other objects of coatable hard plastics. 

Applicable for following hard plastics: polyurethane (PUR), polystyrene (PS), polyamide (PA), polypropylene rubber, modified (EPDM), acrylic butadiene styrene plastics (ABS), glass-fibre reinforced plastics (GfK), hard polyvinyl chloride (Hart-PVC).

Before application, we recommend to wet-sand plastic parts with presto wet-sandpaper P600 and to clean them with MoTip Degreaser.

...

...

...

Coating adhesion increasing primer for such plastic surfaces as PUR, PS, PA, EPDM, ABS, GfK, Hart – PCV etc. Possibility of direct application under top layer (enamel/lacquer). Possibility of direct application under primed layer (primers)
If you want to use primer previously, apply Plastic Primer first, use Anticorrosive Primer / Acryl Primer 1K as a second layer, then e.g. Decoration at the end,
as final layer. 

Notice. Best result when applied at 15-25°C. 

Short drying time: up to 5 min
Efficiency 6 m² by one application
Compatible with all paint systems (alkyd, acrylic, nitro-combination) water and solvent based 
Colourless 
For indoor and outdoor use 
Capacity 400 ml

...

...

...

...

...

...

...

...

...

Epoxy-resin based anti-corrosion protective coating which forms a dark grey almost black protective layer which also acts as a primer.

Once fully cured after 12 - 24 hours the rust is neutralised and the surface can be recoated with filler ...

...

...

...

...

...

...

Very fast drying primer with universal adhesion. Very smooth surface, high covering power. Due to the two spray heads attached the product can be adjusted for spot repair application as well as for larger surfaces.

...

...

...

MoTip Primer is the ideal primer for use as filler and as an adhesion promoter between surface and final coat. Coatable with air-drying acrylic-, synthetic and nitro-combi lacquers. For metal, wood, aluminium, glass, stone and many plastics .

The ideal primer for the subsequent coating with MoTip Kompakt.

Colour grey for all blue, green, golden and silver top coats.
Colour red for all dark-red top coats.
Colour white for all very bright top coats.
Colour yellow for all yellow top coats.

The Primer clings even on galvanized surfaces or old lacquer-sent, if they were cleaned before carefully with MoTip Degreaser.

Before the application of the top coat we recommend to wet-sand with presto wet-sandpaper grain 400.

...

...

...

...

...

...

Aerosol putty for maximum film thickness 100 microns

...

...

...

SPRAY PUTTY

• Fast drying, good adhesion
• Excellent coverage
• Corrosion preventive
• the drying time apx 2 hours
• Easy to sand, both wet and dry (from grain 400)
• Excellent filling properties
• Re-sprayable with all lacquers systems
• coverage 1,25 - 1,75 m²

...

...

...