Mipa 1K-Haftpromoter is a completely transparent universal adhesion promoter for various substrates. Its special formulation provides adhesion to even the most challenging substrates without prior sanding. Time saving results can be achieved since the material is fast drying, recoatable and the fact that there is no sanding required. Recoatable with Mipa 1K- and 2K-topcoats. Mipa 1K-Haftpromoter is transparent, UV-resistant and therefore ideal for recoating with Mipa clearcoats
Coating adhesion increasing primer for such plastic surfaces as PUR, PS, PA, EPDM, ABS, GfK, Hart – PCV etc. Possibility of direct application under top layer (enamel/lacquer). Possibility of direct application under primed layer (primers) If you want to use primer previously, apply Plastic Primer first, use Anticorrosive Primer / Acryl Primer 1K as a second layer, then e.g. Decoration at the end, as final layer.
Notice. Best result when applied at 15-25°C.
Short drying time: up to 5 min Efficiency 6 m² by one application Compatible with all paint systems (alkyd, acrylic, nitro-combination) water and solvent based Colourless For indoor and outdoor use Capacity 400 ml
MoTip Primer is the ideal primer for use as filler and as an adhesion promoter between surface and final coat. Coatable with air-drying acrylic-, synthetic and nitro-combi lacquers. For metal, wood, aluminium, glass, stone and many plastics .
The ideal primer for the subsequent coating with MoTip Kompakt.
Colour grey for all blue, green, golden and silver top coats.
Colour red for all dark-red top coats.
Colour white for all very bright top coats.
Colour yellow for all yellow top coats.
The Primer clings even on galvanized surfaces or old lacquer-sent, if they were cleaned before carefully with MoTip Degreaser.
Before the application of the top coat we recommend to wet-sand with presto wet-sandpaper grain 400.