Slovenčina
English
Categories
- Automotive aerosol paints
- Touch up system
- Color code automotive paints
- Color code from VIN
- Step by step - refinishing paint
- Primers & fillers
- Clear coats
- Polishing
- Non aerosol paints
- Tuning line
- Chassis protection
- Sealing, bonding and lamination
- Appliances
- Tools and guides
- Abrasives
- Universal aerosol paints
- Degreasers and cleaners
- Colour Cards
- Lubricants
- Others
FARLAZ
Automotive touch up paint set
The set contains:
- metallic or base paint 30 ml (made according the color code)
- clear varnish touch up 12ml
- MP stick FINE 1 pcs
- MP stick MEDIUM 1 pcs
14.50€
2K paint aerosol gloss 400ml - RAL
Two component paint in aerosol can
Suitable subtrates:
- nitrocombined paints
- acryl paints
- epoxy paints
( thermoplastic paints are not suitable )
Colour card: RAL
Gloss levels:
- full gloss
- semi gloss
- semi matt
20.90€
2K paint aerosol semigloss 400ml - RAL
Two component paint in aerosol can
Suitable subtrates:
- nitrocombined paints
- acryl paints
- epoxy paints
( thermoplastic paints are not suitable )
Colour card: RAL
Gloss levels:
- full gloss
- semi gloss
- semi matt
20.90€
Touch up primer paint - 45 gr
Primer paint grey 45 gr
1K polyurethane primer paint with excelent anticorosive properties on bare metal surfaces.
If the metal is rusted so rust must be removed and the surface should be sealed with Rust sealer.
It is overcoatable with acrylic, alkyd and nitro paints.
Drying times:
- sandable after 24 hours
- overcoatable after 12 hours without sanding
6.50€
2K paint aerosol semimatt 400ml - RAL
Two component paint in aerosol can
Suitable subtrates:
- nitrocombined paints
- acryl paints
- epoxy paints
( thermoplastic paints are not suitable )
Colour card: RAL
Gloss levels:
- full gloss
- semi gloss
- semi matt
20.90€
Car touch up paint 30ml
A high quality paint for cars prepared according your specification. Colour code is stated on VIN plate.
- metallic paint has to be overcoated with a clear varnish.
- solid - it´s a high gloss paint
The product is aimed for small repair works on your car (pin holes, scratches etc.)
The technology for metallic paints:
1. use a silicon remover agent
2. apply the paint into the schratch
3. let it dry for 15 minutes
4. apply another layer of the paint
5. let it dry from 20 to 30 minutes
6. for the outside area of the damage use a sand paper of 2000 grain and grind wet
7. apply a clear varnish
8. let it dry at least 2 hours
9. apply another final layer of the varnish
10. let it dry 24 - 48 hours
11. use a sand paper of 2000 grain and grind wet
12. As a final step polish the surface with Sanding & Polishing Paste
The technology for solid paints:
1. use a silicon remover agent
2. apply the paint into the schratch
3. let it dry for 15 minutes
4. apply another layer of the paint
5. let it dry for 48 hours
6. use a sand paper of 2000 grain and grind wet
7. As a final step polish the surface with Sanding & Polishing Paste
7.90€
Aerosol metallic paint 375ml + varnish 500ml
A solvent based acryl spray paint prepared according your specification. The color code is stated in the VIN plate on certain places of your car.
The product is suitable for minor car refinishing works (e.g.: spraying bumpers, fenders and other minor works)
Covering is aprox. 1m2 (dry film thickness aprox. 15-20 micrometers),
The paint has to be overcoated with a 1K or 2K clear varnish aprox. after 15 - 60 minutes.
We need to know all the following information:
- car brand
- year of production
- color code from the VIN plate
- year of production
- color code from the VIN plate
Instructions of use:
- if it's necessary to level the surface with a polyester putty ans sand it with a sanding paper folowing the instructions stated on the label on the putty
- spray appropriate filler
- sand the surface with a sanding paper gr. 800
- sand the surface with a sanding paper gr. 800
- spray metallic spray paint in several thin layers (1/2 + 1 + 1 + 1/2) the flash off time is 2-5 min.
- after 15 min. it's absolutelly necessary to overcoat the surface with a clear varnish in several thin layers
- if you require perfect shine the surface is polishable after 24 hours
- if you require perfect shine the surface is polishable after 24 hours
- ALFA ROMEO
- AUDI
- BMW
- CHEVROLET
- CITROEN
- DACIA
- DAEWOO
- FERRARI
- FIAT
- FORD EUROPE
- HONDA
- HYUNDAY
- JAGUAR
- KIA
- LANCIA-AUTOBIANCHI
- LAND ROVER
- MAZDA
- MERCEDES BENZ
- MITSUBICHI
- NISSAN
- OPEL
- PORSCHE
- PEUGEOT
- RENAULT
- ROVER
- SEAT
- SKODA
- SUBARU / FUJI
- SUZUKI
- TOYOTA
- VOLKSWAGEN
- VOLVO
Set of automotive aerosol paints
A solvent based acryl spray paint prepared according your specification. The color code is stated in the VIN plate on certain places of your car.
The product is suitable for minor car refinishing works (e.g.: spraying bumpers, fenders and other minor works)
Covering is aprox. 1m2 (dry film thickness aprox. 15-20 micrometers),
The paint has to be overcoated with a 1K or 2K clear varnish aprox. after 15 - 60 minutes.
We need to know all the following information:
- car brand
- year of production
- color code from the VIN plate
- year of production
- color code from the VIN plate
Instructions of use:
- if it's necessary to level the surface with a polyester putty ans sand it with a sanding paper folowing the instructions stated on the label on the putty
- spray appropriate filler
- sand the surface with a sanding paper gr. 800
- sand the surface with a sanding paper gr. 800
- spray metallic spray paint in several thin layers (1/2 + 1 + 1 + 1/2) the flash off time is 2-5 min.
- after 15 min. it's absolutelly necessary to overcoat the surface with a clear varnish in several thin layers
- if you require perfect shine the surface is polishable after 24 hours
- if you require perfect shine the surface is polishable after 24 hours
- ALFA ROMEO
- AUDI
- BMW
- CHEVROLET
- CITROEN
- DACIA
- DAEWOO
- FERRARI
- FIAT
- FORD EUROPE
- HONDA
- HYUNDAY
- JAGUAR
- KIA
- LANCIA-AUTOBIANCHI
- LAND ROVER
- MAZDA
- MERCEDES BENZ
- MITSUBICHI
- NISSAN
- OPEL
- PORSCHE
- PEUGEOT
- RENAULT
- ROVER
- SEAT
- SKODA
- SUBARU / FUJI
- SUZUKI
- TOYOTA
- VOLKSWAGEN
- VOLVO
Aerosol spray paint 375ml - metallic
A solvent based acryl spray paint prepared according your specification. The color code is stated in the VIN plate on certain places of your car.
The product is suitable for minor car refinishing works (e.g.: spraying bumpers, fenders and other minor works)
Covering is aprox. 1m2 (dry film thickness aprox. 15-20 micrometers),
The paint has to be overcoated with a 1K or 2K clear varnish aprox. after 15 - 60 minutes.
We need to know all the following information:
- car brand
- year of production
- color code from the VIN plate
- year of production
- color code from the VIN plate
Instructions of use:
- if it's necessary to level the surface with a polyester putty ans sand it with a sanding paper folowing the instructions stated on the label on the putty
- spray appropriate filler
- sand the surface with a sanding paper gr. 800
- sand the surface with a sanding paper gr. 800
- spray metallic spray paint in several thin layers (1/2 + 1 + 1 + 1/2) the flash off time is 2-5 min.
- after 15 min. it's absolutelly necessary to overcoat the surface with a clear varnish in several thin layers
- if you require perfect shine the surface is polishable after 24 hours
- if you require perfect shine the surface is polishable after 24 hours
- ALFA ROMEO
- AUDI
- BMW
- CHEVROLET
- CITROEN
- DACIA
- DAEWOO
- FERRARI
- FIAT
- FORD EUROPE
- HONDA
- HYUNDAY
- JAGUAR
- KIA
- LANCIA-AUTOBIANCHI
- LAND ROVER
- MAZDA
- MERCEDES BENZ
- MITSUBICHI
- NISSAN
- OPEL
- PORSCHE
- PEUGEOT
- RENAULT
- ROVER
- SEAT
- SKODA
- SUBARU / FUJI
- SUZUKI
- TOYOTA
- VOLKSWAGEN
- VOLVO
Metallic spray paint 400ml + VARIO cap
A solvent based acryl spray paint prepared according your specification. The color code is stated in the VIN plate on your car.
The product is suitable for minor car refinishing works (e.g.: spraying bumpers, fenders and other minor works)
Covering is aprox. 1m2 (dry film thickness aprox. 15-20 micrometers),
The paint has to be overcoated with a clear varnish aprox. after 30 minutes.
We need to know all this information:
- car brand
- year of production
- color code from the VIN plate
- year of production
- color code from the VIN plate
Instructions of use:
0. step - to fill in all holes and other problem places with a polyester putty and sand it with a sanding paper folowing the instructions stated on the label of the putty
1. step - to spray BODYFILL 360 aerosol 400 ml - grey in several thin layers - actualy it is a filler
2. step - after 24 hours to sand with a sanding paper gr. 600 - 800 - if you use Spray PUTTY MOTIP you can sand it allready after 2 hours.
3. step - to spray metallic spray paint in several thin layers (1/2 + 1 + 1 + 1/2) the flash off time is 2-5 min.
1. step - to spray BODYFILL 360 aerosol 400 ml - grey in several thin layers - actualy it is a filler
2. step - after 24 hours to sand with a sanding paper gr. 600 - 800 - if you use Spray PUTTY MOTIP you can sand it allready after 2 hours.
3. step - to spray metallic spray paint in several thin layers (1/2 + 1 + 1 + 1/2) the flash off time is 2-5 min.
4. step - after 10-15 min. you have to overcoat the surface with a clear varnish in several thin layers as well
5. step - if you require perfect shine the surface is possible to polish after 24 hours - or you can use Spotblender to smooth the edges between the old and the new surface.
5. step - if you require perfect shine the surface is possible to polish after 24 hours - or you can use Spotblender to smooth the edges between the old and the new surface.
- ALFA ROMEO
- AUDI
- BMW
- CHEVROLET
- CITROEN
- DACIA
- DAEWOO
- FERRARI
- FIAT
- FORD EUROPE
- HONDA
- HYUNDAY
- JAGUAR
- KIA
- LANCIA-AUTOBIANCHI
- LAND ROVER
- MAZDA
- MERCEDES BENZ
- MITSUBICHI
- NISSAN
- OPEL
- PORSCHE
- PEUGEOT
- RENAULT
- ROVER
- SEAT
- SKODA
- SUBARU / FUJI
- SUZUKI
- TOYOTA
- VOLKSWAGEN
- VOLVO