Coating adhesion increasing primer for such plastic surfaces as PUR, PS, PA, EPDM, ABS, GfK, Hart – PCV etc. Possibility of direct application under top layer (enamel/lacquer). Possibility of direct application under primed layer (primers)
If you want to use primer previously, apply Plastic Primer first, use Anticorrosive Primer / Acryl Primer 1K as a second layer, then e.g. Decoration at the end,
as final layer. 

Notice. Best result when applied at 15-25°C. 

Short drying time: up to 5 min
Efficiency 6 m² by one application
Compatible with all paint systems (alkyd, acrylic, nitro-combination) water and solvent based 
Colourless 
For indoor and outdoor use 
Capacity 400 ml

...

...

...

Description

High quality spray paints for brake calipers and drums, which give exceptional sporty appearance to wheels. Very popular in visual car and motorcycle tuning. New recipes accordable to requirements of Directive 42/2004/EU. Environmental friendly. Toluene free.

Properties

• Perfect filling properties
• Resistant to petrol
• Resistant to abrasion and scratches
• Super colour and gloss
• Anti-corrosive properties
• Very good adhesion to surface (prepare the surface properly)
• Short drying time: dust dry: 10-15 min, touch dry: 30-40 min,hardened: after 25-30h
• Capacity: 400ml=1,5-2m2
• Heat-resistance up to 150ºC
• Possible, but not necessary use of anti-corrosive primers by DecoColor®

...

...

...

Description

High quality spray paints for brake calipers and drums, which give exceptional sporty appearance to wheels. Very popular in visual car and motorcycle tuning. New recipes accordable to requirements of Directive 42/2004/EU. Environmental friendly. Toluene free.

Properties

• Perfect filling properties
• Resistant to petrol
• Resistant to abrasion and scratches
• Super colour and gloss
• Anti-corrosive properties
• Very good adhesion to surface (prepare the surface properly)
• Short drying time: dust dry: 10-15 min, touch dry: 30-40 min,hardened: after 25-30h
• Capacity: 400ml=1,5-2m2
• Heat-resistance up to 150ºC
• Possible, but not necessary use of anti-corrosive primers by DecoColor®

...

...

...

Description

High quality spray paints for brake calipers and drums, which give exceptional sporty appearance to wheels. Very popular in visual car and motorcycle tuning. New recipes accordable to requirements of Directive 42/2004/EU. Environmental friendly. Toluene free.

Properties

• Perfect filling properties
• Resistant to petrol
• Resistant to abrasion and scratches
• Super colour and gloss
• Anti-corrosive properties
• Very good adhesion to surface (prepare the surface properly)
• Short drying time: dust dry: 10-15 min, touch dry: 30-40 min,hardened: after 25-30h
• Capacity: 400ml=1,5-2m2
• Heat-resistance up to 150ºC
• Possible, but not necessary use of anti-corrosive primers by DecoColor®

...

...

...

Description

High quality spray paints for brake calipers and drums, which give exceptional sporty appearance to wheels. Very popular in visual car and motorcycle tuning. New recipes accordable to requirements of Directive 42/2004/EU. Environmental friendly. Toluene free.

Properties

• Perfect filling properties
• Resistant to petrol
• Resistant to abrasion and scratches
• Super colour and gloss
• Anti-corrosive properties
• Very good adhesion to surface (prepare the surface properly)
• Short drying time: dust dry: 10-15 min, touch dry: 30-40 min,hardened: after 25-30h
• Capacity: 400ml=1,5-2m2
• Heat-resistance up to 150ºC
• Possible, but not necessary use of anti-corrosive primers by DecoColor®

...

...

...

Description

High quality spray paints for brake calipers and drums, which give exceptional sporty appearance to wheels. Very popular in visual car and motorcycle tuning. New recipes accordable to requirements of Directive 42/2004/EU. Environmental friendly. Toluene free.

Properties

• Perfect filling properties
• Resistant to petrol
• Resistant to abrasion and scratches
• Super colour and gloss
• Anti-corrosive properties
• Very good adhesion to surface (prepare the surface properly)
• Short drying time: dust dry: 10-15 min, touch dry: 30-40 min,hardened: after 25-30h
• Capacity: 400ml=1,5-2m2
• Heat-resistance up to 150ºC
• Possible, but not necessary use of anti-corrosive primers by DecoColor®

...

...

...

Professional acrylic lacquers for wheel rims of cars motorbikes made of plastic, aluminium and other metals. 
MEGAFELGA by DECOCOLOR has one of the best reputations among competitive products on the market. 

Notice. Best result when applied at 15-25°C. 

Faster drying time up to 5 minutes !
Touch dry: 15-20 min; Hardened: 16-20 h
Efficiency 2-2,5 m² depending on colour and type of surface by one application 
Very good covering
Very good adhesion
Creates hard coating resistant to scratches and hits
Anticorrosive properties
Petrol resistance
Resistant to weather conditions 
4 basic colours in RAL system 
For indoor and outdoor use
Capacity 500 ml

...

...

...

Professional acrylic lacquers for wheel rims of cars motorbikes made of plastic, aluminium and other metals. 
MEGAFELGA by DECOCOLOR has one of the best reputations among competitive products on the market. 

Notice. Best result when applied at 15-25°C. 

Faster drying time up to 5 minutes !
Touch dry: 15-20 min; Hardened: 16-20 h
Efficiency 2-2,5 m² depending on colour and type of surface by one application 
Very good covering
Very good adhesion
Creates hard coating resistant to scratches and hits
Anticorrosive properties
Petrol resistance
Resistant to weather conditions 
4 basic colours in RAL system 
For indoor and outdoor use
Capacity 500 ml

...

...

...

Flexible, fast drying mat film for any type of surface. Wide application: industry, decoration, mototuning, home and garden. Protects against corrosion.

The most important asset – easy to peel off. Paint. Don’t you like it- peel it easily off! 

Notice. Thickness and flexibility depends on number of layers you applied. One layer is 30-40 microns. Recommended is to apply 100-120 microns, what means 3 layers at least, at 10 minutes intervals between each. Best result when applied at 15-25°C. 

Easy way to remove applied film, immediately after drying, as well
No need to use cleaners or solvents – just peel it off
Doesn’t change the structure of painted surface
Anti-slip properties
Very good adhesion
360° FUN nozzle allows applying in different positions by wide and narrow stream
Resistant to high and low temperatures from -35°C to +90°C
Water and weather resistant
Matt finish of painted surface 
Short drying time: 5-8 min
Touch dry: 15-20 min; Hardened: 16-20 h
Efficiency 1,5-2 m² depending on colour and type of surface by one application
10 most common colours in RAL system
For indoor and outdoor use
Capacity: 400ml

...

...

...

Flexible, fast drying mat film for any type of surface. Wide application: industry, decoration, mototuning, home and garden. Protects against corrosion.

The most important asset – easy to peel off. Paint. Don’t you like it- peel it easily off! 

Notice. Thickness and flexibility depends on number of layers you applied. One layer is 30-40 microns. Recommended is to apply 100-120 microns, what means 3 layers at least, at 10 minutes intervals between each. Best result when applied at 15-25°C. 

Easy way to remove applied film, immediately after drying, as well
No need to use cleaners or solvents – just peel it off
Doesn’t change the structure of painted surface
Anti-slip properties
Very good adhesion
360° FUN nozzle allows applying in different positions by wide and narrow stream
Resistant to high and low temperatures from -35°C to +90°C
Water and weather resistant
Matt finish of painted surface 
Short drying time: 5-8 min
Touch dry: 15-20 min; Hardened: 16-20 h
Efficiency 1,5-2 m² depending on colour and type of surface by one application
10 most common colours in RAL system
For indoor and outdoor use
Capacity: 400ml

...

...

...

Universal synthetic solvent-based varnish for painting surfaces made of metal, wood, ceramics, glass, wicker, cardboard, fabrics, fresh and artificial flowers, and some plastics. Wide range of application hobby and professional works: at home, garden, automotive and industry. Especially practical for works of art and decoration. 

Notice. For surfaces made of PUR, PS, PA, EPDM, ABS, GfK, Hart – PCV use 
Plastic Primer DECO COLOR previously. Best result when applied at 15-25°C. 

Very good covering of painted surface
High gloss
Short drying time: 10-15 min
Touch dry: 30-40 min; Hardened: 24 h
Efficiency 1,5-2 m² depending on colour and type of surface by one application
High resistance to abrasion and weather conditions
Variety of colours: 35 most popular colours in RAL system
For indoor and outdoor use
Capacity 400 ml

...

...

...

Universal synthetic solvent-based lacquer for painting surfaces made of metal, wood, ceramics, glass, wicker, cardboard, fabrics, fresh and artificial flowers, and some plastics. Wide range of application hobby and professional works: at home, garden, automotive and industry. Especially practical for works of art and decoration. 

Notice. For surfaces made of PUR, PS, PA, EPDM, ABS, GfK, Hart – PCV use 
Plastic Primer DECO COLOR previously. Best result when applied at 15-25°C. 

Very good covering of painted surface
High gloss
Short drying time: 10-15 min
Touch dry: 30-40 min; Hardened: 24 h
Efficiency 1,5-2 m² depending on colour and type of surface by one application
High resistance to abrasion and weather conditions
Variety of colours: 35 most popular colours in RAL system
For indoor and outdoor use
Capacity 400 ml

...

...

...