Presto rust eraser

larger image

Description

PROPERTIES

Easy to use
Ideal for rust removing of small paint or body damages.
Quick, clean and free of scratches and abrasion marks
Rust removal without damaging intact paint surfaces
No "risk of injury" for the body panel
Grinding lead of finest fibers
After abrasion of the glass fibers just replace a new lead
Two replacement leads included (in the housing)

PHYSICAL AND CHEMICAL DATA

Measurements: 130 x 12 mm
Packing:
Plastic housing with totally 3 rust eraser leads (of finest fibers)

ENVIRONMENT AND LABELLING

Environmentally sound: The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.

Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".

Marking/Labelling: All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.

USING INSTRUCTIONS

The most presto spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the labels!

Application

Erase with the 2 mm above grinding lead under slight pressure.
Do not push the lead more than 2 mm out of the housing.
The fiberglass lead sharpens itself automatically and allows precise work.
Is the part of the outstanding lead used, place the mine a step forward in the thread.
Therefore pull the gray cap forward and open the housing.
Is the lead totally used up, just replace it with a included replacement lead.
In the housing are totally 2 replacament leads.