Slovenčina
English
DIY products for car refinishing area in order to repair:
- small scratches, craters or beginning corrosion
- polishing of the repaired places
Categories
- Automotive aerosol paints
- Touch up system
- Color code automotive paints
- Step by step - refinishing paint
- Primers & fillers
- Clear coats
- Polishing
- Non aerosol paints
- Tuning line
- Chassis protection
- Sealing, bonding and lamination
- Appliances
- Tools and guides
- Abrasives
- Universal aerosol paints
- Degreasers and cleaners
- Colour Cards
- Others
- Sale
Automotive touch up paint set
The set contains:
- metallic or base paint 30 ml (made according the color code)
- clear varnish touch up 12ml
- MP stick FINE 1 pcs
- MP stick MEDIUM 1 pcs
13.50€
Presto rust eraser
PROPERTIES
- Easy to use
- Ideal for rust removing of small paint or body damages.
- Quick, clean and free of scratches and abrasion marks
- Rust removal without damaging intact paint surfaces
- No "risk of injury" for the body panel
- Grinding lead of finest fibers
- After abrasion of the glass fibers just replace a new lead
- Two replacement leads included (in the housing)
PHYSICAL AND CHEMICAL DATA
- Measurements: 130 x 12 mm
- Packing:
Plastic housing with totally 3 rust eraser leads (of finest fibers)
ENVIRONMENT AND LABELLING
Environmentally sound: The products of MOTIP DUPLI are 100% free of heavy metals. The caps and packagings are made of recyclable material.
Disposal: Only the completely emptied cans should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as "special refuse".
Marking/Labelling: All products made by MOTIP DUPLI comply with the actual labelling regulations according to Preparation Guideline 1999/45/EG. All aerosols correspond to TRGS 200 and TRG 300 as well as to aerosol guideline 75/324/EWG in the actually valid version.
USING INSTRUCTIONS
The most presto spray paints have a so-called no-spray ring or a tamper-proof cap. This is to avoid unauthorized use. Please see the corresponding advises on the cap or on the label.
Before use, carefully read and observe the warning texts on the labels!
Application
- Erase with the 2 mm above grinding lead under slight pressure.
- Do not push the lead more than 2 mm out of the housing.
- The fiberglass lead sharpens itself automatically and allows precise work.
- Is the part of the outstanding lead used, place the mine a step forward in the thread.
- Therefore pull the gray cap forward and open the housing.
- Is the lead totally used up, just replace it with a included replacement lead.
- In the housing are totally 2 replacament leads.
Touch up primer paint - 45 gr
Primer paint grey 45 gr
1K polyurethane primer paint with excelent anticorosive properties on bare metal surfaces.
If the metal is rusted so rust must be removed and the surface should be sealed with Rust sealer.
It is overcoatable with acrylic, alkyd and nitro paints.
Drying times:
- sandable after 24 hours
- overcoatable after 12 hours without sanding
6.50€
Car touch up paint 30ml
A high quality paint for cars prepared according your specification. Colour code is stated on VIN plate.
- metallic paint has to be overcoated with a clear varnish.
- solid - it´s a high gloss paint
The product is aimed for small repair works on your car (pin holes, scratches etc.)
The technology for metallic paints:
1. use a silicon remover agent
2. apply the paint into the schratch
3. let it dry for 15 minutes
4. apply another layer of the paint
5. let it dry from 20 to 30 minutes
6. for the outside area of the damage use a sand paper of 2000 grain and grind wet
7. apply a clear varnish
8. let it dry at least 2 hours
9. apply another final layer of the varnish
10. let it dry 24 - 48 hours
11. use a sand paper of 2000 grain and grind wet
12. As a final step polish the surface with Sanding & Polishing Paste
The technology for solid paints:
1. use a silicon remover agent
2. apply the paint into the schratch
3. let it dry for 15 minutes
4. apply another layer of the paint
5. let it dry for 48 hours
6. use a sand paper of 2000 grain and grind wet
7. As a final step polish the surface with Sanding & Polishing Paste
6.90€
Touch up tip white FINE - MP
Touch-up tip for accurate retouching of small defects in paint work
- size: Fine
Touch up tip white yellow MEDIUM - MP
Touch-up tip for accurate retouching of small defects in paint work
- size: Medium
Touch up clear varnish - pencil 12ml
MoTip 2-Coat Clear Lacquer is weather-resistant, high gloss finish for small scratches.
Absolutely necessary to seal all metallic and pearl lacquers to protect them from weathering and environmental impact.
Even suitable as top coat for MoTip Tuning Alu Wheel Paint (e. g. argento art.no. 06020).
MP One step POLISH 100ml
MP ONE-STEP Super-Polish is a polish of the latest
generation with which it is easy to remove traces of
spray dust, spraying transitions and sanding traces.
This unique product makes it possible for the first
time to do polishing work after the fine sanding
process with P1500 – P2000 water sanding paper in
one operation, as well in case of dark paints.
Paint defects can be removed with this product without
any problems. The annoying and sometimes difficult
removal of polishing agents, e.g. on plastic surfaces,
is no longer a problem with MP ONE-STEP Super-
Polish, it can simply be wiped away. Only MP ONESTEP
Super-Polish provides a perfect finish of the paint surface.
Technical Data:
· polishing in one operation (also in case of dark paints)
· silicone-free, aluminium oxide
· suitable for scratch resistant paints (nano topcoats)
· hologram-free polishing after the fine sanding process
· easy removal of spraying transitions and traces of spray dust
· usable for polishing work by hand or machine
4.90€
Polishing sponge 79mm orange UNI
By using MP Polilisching sponge UNI in conjunction with the unique polishing agent OneStep-SuperPolish, it is not only possible to polish the work on trapped dust insertions shortly after the coating but also to remove scratches in one process.
Technical Data:
- universal 25 mm polishing sponge for the polishing of
trapped dust insertions after the final sanding
- diameter 79mm
- velcro
4.40€
Degreaser 200 ml
The cleaner is used to clean textiles from greasy dirt and grease, degreasing and cleaning especially metal objects.
1.15€
Sanding paper gr.2000 - wet
The sanding paper is suitable for removing a dust on a varnish before polishing.
0.59€Important Links
Bestsellers
Who's Online
There currently are 22 guests online.
